COMMANDER 9100 HD – DIGITAL SATELLITE RECEIVER DVB-S2
High Definition Satellite receiver with embeded Reader
The COMMANDER 9100 HD is a compact and discreet Full HD digital satellite receiver. It comes with a remote control that can be programmed for basic TV functions. Additionally, it features PVR recording capabilities. Enjoy digital satellite channels with stunning picture quality and crystal-clear sound.
MAIN FEATURES COMMANDER 9500 HD COMMANDER 9100 HD
- Satellite channels reception - High Definition DVB-S2
- BUILT-IN CARD READER
- EXCELLENT MENU – PREMIUM BUILD QUALITY – FAST & SEAMLESS OPERATION – HIGH-QUALITY REMOTE CONTROL – SMART FEATURES
- CONTINUOUSLY SUPPORTED – POWERFUL SOFTWARE – USB UPDATES
- GREEK MENU – GREEK EPG – GREEK TELETEXT – USER MANUAL IN GREEK
- EPG: DAILY – WEEKLY – EXTENDED. TELETEXT VIA VBI AND OSD
- LNB IN – HDMI OUT – JACK TO RS 232 – JACK TO SCART OR RCA – 2 USB – MINI USB TO IR DISPLAY ME ΝΟΥΜΕΡΟ ΚΑΝΑΛΙΟΥ – COAXIAL SOUND
- SUPPORTS DISEQC 1.0 1.1 1.2 13/18V 0/22KHz USALS
- AUTOMATIC SCAN – MANUAL SCAN – BLIND SCAN – NETWORK SCAN
- 4000 CHANNEL CAPACITY – 32 FAVORITE LISTS
- 8 DIFFERENT SORTING LISTS: ALL – ALPHABETICAL – BY FREQUENCY – BY PROVIDER – BY ENCRYPTION – HD – FREE – FAVORITES
- FULL CHANNEL MANAGEMENT: MOVE – DELETE – SKIP – RENAME – ADD CHANNELS – ADD TO FAVORITES
- INSTANT SETUP – PRE-CONFIGURED INSTALLATION – CHANNELS FROM 8 SATELLITES ALREADY TUNED AND ARRANGED IN THE CORRECT ORDER
- CAPABILITY TO SAVE CHANNELS TO A USB STICK AND BACK UP THE ENTIRE SOFTWARE
- VERY LOW PRICE IN RELATION TO QUALITY
COMMANDER 9100 HD UPGRADE
We copy the last firmware to a USB stick (we don't put it inside a folder).
WARNING! each model accepts only its own software. installing the wrong software will damage the receiver.
To upgrade 9100 HD we use the firmware 12-10-2017_FirmwareCommander9100HD.abs
The receiver is switched on from Standby and connected to the TV. We insert the stick into the receiver. A message appears on the TV screen: USB Disk A connected.
We press Menu - Tools - Upgrade by USB.
We select: Upgrade Mode: "Firmware+Settings(Channels will be deleted)". If we have made some settings on the receiver that we want to keep, or we have channels loaded and we don't want to lose them, then in the Upgrade Mode we select: "Firmware (Channels will not deleted)".
We select from below the firmware upgrade file (.abs) and we press Start from below. A message appears : "Alert: Do not remove U Disk during upgrading". At the second message that appears : "Are you sure to burn flash?", we press Yes to start the upgrade procedure. After a while the procedure is over the receiver is auto restarting.
Note: The file name .abs that we have saved in the USB stick, we can rename it safelly. We must not change the extension .abs.
At the Upgrade Mode, if we select "defaultdb" or "UserDB", then they will upload only the settings and the channels channels which are built into the .abs software. (Usually the factory software does not include channels, so there will be no channels after the upgrade). Generally we do not use the above 2 options.
SAVE CHANNELS TO USB AND DOWNLOAD CHANNELS FROM USB
Once you have downloaded the channels on your receiver and arranged them in your preferred order, you can save them to a USB stick as a channels.udb file. Go to Menu → Tools → Save Channels to USB.
If you later perform a factory reset and lose your channels, or if you want to load them onto a new receiver, you can restore them by going to Menu → Tools → Load Channels from USB. The receiver will automatically select and load the channels.udb file from the USB stick.
Note: the channel file name, channels.udb, must not be renamed. if the file is renamed, the receiver will not recognize it and the channel loading process will not start. the channels.udb file must be located in the root directory of the usb stick (i.e., it should not be inside any folder).
BACKUP SYSTEM
If you have upgraded the receiver, downloaded the channels, arranged them in your preferred order, and configured all the settings you want, you can perform a Full Backup of your system. This will save everything (software, channels, and settings) to a USB stick as a backup.abs file.
Go to Menu → Tools → USB Upgrade, and select Upgrade Type: Backup System. Below, in the “Upgrade File” field, the name of the file to be created (Backup.abs) will appear automatically. Press Start, and a file named Backup.abs will be automatically created on the USB stick.
Later, this file can be loaded onto the same receiver or onto a new receiver by selecting Upgrade Type: Software + Settings on the receiver. (Note: The channels will be deleted during this process.)
Note: In this case, the channels will not be deleted, because they are included in the Backup.abs file that we have created.
